Jiaxing Running Rubber&Plastic Co.,Ltd
|Place of Origin:||China|
|Product Name:||PU Adhesive||Appearance:||Yellowish, Transparent|
|Packaging:||200kg/barrel, Or 20kg/bucket||Features:||Eco-friendly|
eco-friendly yellowish, transparent PU Adhesive , 20kg/bucket
It is a single-component polyurethane adhesive that is superior in performance, convenient in use.
This adhesive is tested to be eco-friendly, light smell, high viscosity, good cut and peel strength, heat resistant, anti-aging, It can resist water, oil dirt and eroding after the adhesive film foamed and solidified.
Appearance: yellowish, transparent
Packaging: 200kg/barrel, or 20kg/bucket
MDI environment-friendly adhesive: It is mainly made from polyether polyol and Diphenyl-methane-diisocyanate. The raw materials and accessories are all of high grade, Finished products contain no TDI, Toluene xylene, short chain chlorcosane, DOP, MOCA etc. reach colorless and odourless grade. Viscosity and consistency is just right for construction. Solidifying time can be adjusted according to actual environment temperature. To avoid the yellowing phenomenon of adhesive itself, anti-ultraviolet agent and ani-aging agent are especially added to delay color change. It passes oral test and all other relevant standards.
This product is applicable to the pavement of the ventilation plastic racetrack and the production of the safety ground mats ,the pavement of stadium and playground.
And its weak adhesiveness before the cross-linking hardening will not stick to the tools and instruments and thus will facilitate the construction, reduce the usage of organic solvent and save costs.
The superiority of this product lies in its resistance from hardening, high elasticity and rebound rate , making more comfortable to footing on it as well as maintaining sound motility.
1. Normal temperature adhesive: This product can be glued to most solid items, for example: its ratio with REM granules at bottom layers of athletic tracks is 1:7; with EPDM granule for playground is 1:6; with EPDM for court is 1:5.5 ,Under temperature 20C, 20- 30 % humidity condition, solidifying time is 8 hours and time for strength complete reaction is about 24 hours (Adhesive proportion could be increased according to physical requirements.).
2. High temperature adhesive; 1ts main raw materials and techniques are roughly the same as normal temperature adhesive. The solidifying time on heating equipment of high temperature is about 8 minutes (depending on different time and temperature set). Its mainly used to make rubber tiles, rubber rolls and other high temperature mold-pressed binding materials.